Cable ladders

Cable ladders

Cable ladders GLO-4, Swifts and naval SLB

Legrand cable ladders are the ideal solution for large concentrations of cables. Legrand offers a wide range with a variant to suit every application. 

Choose a cable ladder or click on a picture for more information: 


Long Range Ladders Swifts

The answer to heavy duty installations for indoor use

Swifts cable ladders have been tried and tested in installations of all sizes all over the world: from medium duty installations in small commercial buildings to extra heavy duty installations in refineries, logistics centres and heavy industrial applications. This new long span range in sendzimir (GS) galvanized finish is the perfect answer to the needs of indoor applications, complementing our existing hot-dip galvanized steel solution. 

Discover the Swifts H125 and H150 long-range ladders in our online catalogue. 
 
 
 
Swift


GLO-4 Cable Ladders for light to medium duty applications

The GLO-4 cable ladder is often used in the tertiary sector. The system offers a very complete range of dimensions and load possibilities. In combination with a wide range of fittings, this system is therefore particularly quick and flexible to install. GLO-4 ladders are available in sendzimir and hot-dip galvanized versions. 
 

Versions

  • Sendzimir galvanized and hot-dip galvanized 
  • Heights: 60 and 100 mm 
  • Distance between rungs: 100, 200 and 300 mm 
  • Lengths: 3000 and 6000 mm 
  • Widths: 200, 300, 400, 500 and 600 mm 
  • Colours: pearl white RAL 1013 and pure white RAL 9010 

Features

  • To be connected with screwless quick-release fasteners 
  • Complete range of fittings and accessories 
  • Fittings mountable without connection plate 
  • Mounted fitting steps with upward opening and a distance between steps of > 200 mm 
  • Choice of different suspension systems 
  • Scale tested and approved for many applications 
  • On request :  
    • Other rung distances for the cable ladder itself 
    • Painted execution, polyester/epoxy powder coating 
    • Other colors 

Standards:

  • Complies with IEC 61537 (VDE E 0639)  
  • Sendzimir galvanized according to NEN EN 10326/10327  
  • Hot-dip galvanized according to NEN EN 1461 (+/-50 µm) 
     

Industrial Cable Ladders Swifts

Complete system for heavy and extra-heavy industrial applications 
 
The industrial cable ladder was specifically developed to meet the stringent requirements of heavy industry and drilling platforms. Even extreme loads can be supported and spans of up to eight metres can be achieved. Legrand's industrial cable ladder thus responds to the trend towards shorter installation times and savings on equipment. This new system is available in four types of ladders, namely light, medium, heavy and extra heavy duty. 
 
 

Versions :  

  • Hot dip galvanized and 316 stainless steel  
  • Heights :  
    • Medium duty (Topaz): 100 mm 
    • Heavy duty (Sapphire): 125 mm 
    • Extra heavy duty (Emerald): 150 mm 
  • Widths: 150 and 1000 mm  
  • Lengths: 3000 and 6000 mm 

Features

  • A coherent system for four applications, namely light duty, medium duty, heavy duty and extra heavy duty 
  • Complete system with fittings, accessories and support systems 
  • Folded edges for ladders and fitting accessories, providing extra strength and avoiding sharp edges 
  • The right solution for every situation: hot-dip galvanized, additional hot-dip galvanized 80 µm (deep galvanized) and stainless steel 316 L 
  • 316 L stainless steel: all parts are pickled and passivated as standard to provide the best possible protection against corrosion. A perfect visual quality is thus offered. 
  • Lengths: 3000 and 6000 mm 
  • Distance between rungs: 300 mm from centre to centre 
  • Radius: 300 mm as standard, larger radii on request 
  • Angles: 30, 45, 60 and 90 degrees 
  • Time-saving, integrated splicing on all connection accessories 
  • Continuous perforation pattern, ladder can be sawn at any point, no drilling required 

Standards

  • Load charts determined in accordance with IEC 61537 (type 1) 
  • Hot-dip galvanizing: minimum average zinc thickness of 55 μm, in accordance with NEN EN 1461  
    • On request a thickness of 80 μm​ in deep galvanized version (D)